Monitor Test

CE. Monitor test

General

The values of the parameters read by the ST from the control module are displayed in the monitor test. The values may be shown in three different ways, the choice depending on the fault-tracing procedure and the judgement of the technician.

A wide range of predefined lists is available. These may be modified, as required, to suit the individual method of working.

The parameters shown in Section ND. 'Scrolling parameters (MFI module), Volvo Scan Tool' and Section NE. 'Scrolling parameters (ICM), Volvo Scan Tool' may be displayed in the monitor test mode.

Function menu






Use up and down arrow keys to move cursor.
Press ENTER to select MONITOR TEST.

Sub-function menu

Use up and down arrow keys to move cursor.
Press ENTER to select sub-function.

The following sub-functions are available in the monitor test mode:

Scroll MFI LH and DI EZ (see CE1).
Predefined list (see CE2).
Own list (see CE3).
Reset order (see CE4).