Cylinder Head Assembly: Specifications
| Maximum Distortion without machining | Longitudinal | 0.50 Millimeter (mm) |
| Lateral | 0.25 Millimeter (mm) | |
| Height of Cylinder Head | New | 103.5 +/- 0.5 Millimeter (mm) |
| Minimum after machining | 102.5 Millimeter (mm) | |
| Head Bolt Torque | Stage 1 | 20 +/- 2 Newton Meter (Nm) |
| Stage 2 | 40 +/- 5 Newton Meter (Nm) | |
| Stage 3 | Additional 115 +/- 10 deg |