Engine: Technical Service Bulletins

• Customer Interest
  • Engine Controls - Decreased Idle Speed When A/C Engages
  • Accessory Drive Belt - Chirping Sound
  • Engine - Hard Cold Starting and Performance
• By Symptom
  • Abnormal wear/deterioration
    • Cylinder Block, B6304 - Replacing
    • Cylinder Block - Replacing
  • Customer Interest
    • Engine Controls - Decreased Idle Speed When A/C Engages
    • Accessory Drive Belt - Chirping Sound
    • Engine - Hard Cold Starting and Performance
  • Driveability
    • Engine Controls - Decreased Idle Speed When A/C Engages
    • Camshaft - Adjusting Irregular Idling
      • Overview
      • Crank and Camshaft Settings
      • Camshaft Pulley Installation
  • Erratic Operation
    • Engine Controls - Decreased Idle Speed When A/C Engages
  • Leaks
    • Cylinder Block, B6304 - Replacing
    • Cylinder Block - Replacing
  • Noise
    • Auxiliary Equipment Belt Drives - Fault Tracing
      • Overview
      • Description of Components
      • Defect Type
    • Accessory Drive Belt - Chirping Sound
  • Poor performance
    • Engine - Hard Cold Starting and Performance
  • Starting problems
    • Engine - Hard Cold Starting and Performance
  • Warping
    • Cylinder Block - Replacing
• All Technical Service Bulletins
  • Engine - Pressure Washing Precautions
  • Engine - Thread Reconditioning
    • Overview
    • Tools Required For Installation
    • Spark Plug Threads
    • Countersunk Threads
    • Cylinder Head and Camshaft Cover
    • Cylinder Block and Intermediate Section
  • Vehicle - New Car Features
  • Tools - Frost Plug
  • Cylinder Head - Replacing
  • Cylinder Block, B6304 - Replacing
  • Cylinder Block - Replacing
  • Auxiliary Equipment - Updating When Replacing Engine
    • Overview
    • Adapting A/C Compressor
    • Installing Pulley With New Forward Position
    • Adapting Generator
    • Adapting Power Steering Pump
  • Valve Stem Seal - Replacing
  • Engine - Factory Sealed Bolts
  • Safety Precaution - Fluoroelastomer (Viton) Seals
  • Engine Controls - Decreased Idle Speed When A/C Engages
  • Connecting Rod Cap - New Screws
  • Exhaust Camshaft - Damper Addition
  • Camshaft - Adjusting Irregular Idling
    • Overview
    • Crank and Camshaft Settings
    • Camshaft Pulley Installation
  • Timing Belt - Installation, Tension Verification
  • Timing Belt - Replacement Interval Change
  • Engine - Rear Main Seal Replacement
  • Oil - Abnormal Consumption
  • Engine Oils - Suggested Usage
  • Auxiliary Equipment Belt Drives - Fault Tracing
    • Overview
    • Description of Components
    • Defect Type
  • Accessory Drive Belt - Chirping Sound
  • Engine Oil - Recommended
  • Engine - Hard Cold Starting and Performance