Signal Description Overview

Connector A:

Connector A # A1 - # A43
All values specified are measured between the terminal specified in column 1 and terminal # A42 (signal ground), unless otherwise indicated in brackets.

NOTE: It is important to connect breakout box and check ground terminals before readings are taken.

The values specified in the table apply with the engine unloaded and at normal operating temperature. Unless otherwise specified the data applies to all engine variants.

U = DC in volts (V)
Ubat = battery voltage
Ulow = voltage approx. 0 V or O V
t = time in milliseconds (ms)
UAC = AC in volts (V)
f = frequency in Hertz (Hz)
%duty = duty cycle (pulse ratio) as a percentage (%)