Hood Cover

Before starting work, see CHA. Preparations Before Work. Procedures





Loosen the hinge screws sufficiently to allow adjustment. Adjust hood cover so that it is parallel with edge of [1][2]hood storage compartment. Distance (C) between hood cover and luggage compartment lid should be approximately 4 - 6 mm (0.16- 0.24"), and height (D) should be 0 - 2 mm (0 -0.08"). The distance between the hood cover and body should be 4 - 6 mm (0.16-0.24"), and height (A) should be 0-2 mm (0 - 0.08").

Tighten hinge screws to 25 Nm (18.4 if-lb).

Adjust the Z-support so that the hood cover forms a straight vertical line against the edge of the [1][2]hood storage compartment.

If necessary, adjust rear lock arms, as described in CHB5. Adjustments