Control System Replacement
SPECIAL TOOLS- Lifting frame tool No. 999 5006, or equivalent
- Support rails tool No. 999 5033, or equivalent
- Lifting hook tool No. 999 5460, or equivalent
- Separator tool No. 999 5477, or equivalent
- Protective Sleeve tool No. 999 5562, or equivalent
- Mobile Jack tool No. 998 5972, or equivalent
- Tool No. 998 8670, or equivalent
- Protractor tool No. 951 2050, or equivalent
- Refer to special tool section for additional tool information. Tools and Equipment
1. Preparation
- Refer to steps 1 through 14 of Open The Control System. Service and Repair
2. Removal of control system
- Remove control system from transmission.
- Detach cable harness and connector from solenoids.
- Remove seven screws and two in cover.
- Remove seals (two) between control system and transmission (see illustration).
NOTE: Ensure that no dirt enters the transmission.
3. Finishing work
- Install control system.
Refer to steps 22 through 38 of Open The Control System. Service and Repair