Intermittent Fault

Intermittent fault

Identification of the control module version
Different fault-tracing should be carried out depending on the control module version Note the identification code in the lower left corner of the control module product plate





Does the identification code begin with "M5." or "P1." ?

Yes - Check leads and connections

No - Erasing the DTC

-------------------------------------------------

Check leads and connections
Check the cable between the battery positive terminal and control module #9 for intermittent breaks Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.









Select Continue when the fault has been repaired

Continue - Erasing the DTC

-------------------------------------------------

Erasing the DTC




- Ignition on
- Erase the DTC





Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Check leads and connections

-------------------------------------------------