Operation CHARM: Car repair manuals for everyone.

General Interference Fault






General interference fault

Read off other diagnostic trouble codes (DTCs)
Read off other diagnostic trouble codes (DTCs).
If diagnostic trouble codes (DTCs) ABS-432 as well as ABS-433 and/or ABS-443 have been read off then diagnostic trouble codes (DTCs) ABS-433 and/or ABS-443 must be remedied before ABS-432.





Have diagnostic trouble codes (DTCs) ABS-432 and ABS-433 and/or ABS-443 been read off?

Yes - Conditions

No - Status check

-------------------------------------------------

Conditions
Diagnostic trouble codes (DTCs) ABS-433 and/or ABS-443 must be remedied before ABS-432.
Continue fault-tracing.
If diagnostic trouble codes (DTCs) ABS-433 and/or ABS-443 have already been remedied then ignore them when reading out diagnostic trouble codes (DTCs).

Have diagnostic trouble codes (DTCs) ABS-433 and/or ABS-443 already been remedied.

Yes - Status check

No - No Fault Found

-------------------------------------------------

Status check

Hint: To guarantee the correct diagnostic trouble code (DTC) the DTC status must be established with a status check.

- Disconnect the Volvo Scan Tool (ST) to interrupt diagnostics.

Warning! The ABS and EBD functions are not available when Volvo Diagnostics are activated. Take care when test driving the car as the wheels may lock when braking.




- Test drive car according to Test driving Test Driving
- Read off diagnostic trouble code (DTC) status.

Is the status permanent?

Yes - Permanent fault Permanent Fault

No - Intermittent fault Intermittent Fault

-------------------------------------------------