Electrical Or Mechanical Fault Intermittent Fault

Electrical or mechanical fault Intermittent fault

Check leads and connections
Check the pump motor and pump motor connector for contact resistance and oxidation Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Check the leads between the pump motor and the pump motor connector for intermittent break as per Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and intermittent short-circuiting to ground as per Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Check the cable between the battery and control module #25 for intermittent breaks as per Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.









Select Continue when the fault has been repaired

Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test - Check leads and connections

-------------------------------------------------