Signal Too Low. Intermittent Fault

Signal too low. Intermittent fault

EFI-616 EVAP canister shut-off valve, signal

Identification
First read Identifying cars constructed according to ORVR Application and ID.

Is the car constructed according to ORVR?

Yes - Safety

No - Signal too low. Intermittent fault

-------------------------------------------------






Signal too low. Intermittent fault

EFI-616 EVAP canister shut-off valve, signal

Checking cables and terminals




- Check cable between EVAP canister shut-off valve terminal 2 and engine control module (ECM) B19 for an intermittent short-circuit to ground Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Continue -

------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - FAULT FOUND

------------------------

Attempt New Test -

-------------------------------------------------


-------------------------------------------------

Safety
First read Safety regulations for handling fuel Safety Regulations For Handling Fuel.

Continue - Checking cables and terminals

-------------------------------------------------

Checking cables and terminals
Check cable between EVAP canister shut-off valve terminal 2 and control module #B19 for an intermittent short-circuit to ground. Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.













Continue - Fault-tracing information
DONE

-------------------------------------------------

Fault-tracing information
Information
Attempt New Test - Checking cables and terminals

-------------------------------------------------