Signal Too High. Intermittent Fault
Signal too high. Intermittent fault
EFI-621 Fuel tank pressure sensor, signal
Identification
First read Identifying cars constructed according to ORVR Application and ID.
Is the car constructed according to ORVR?
Yes - Safety
No - Signal too high. Intermittent fault
-------------------------------------------------
Signal too high. Intermittent fault
EFI-621 Fuel tank pressure sensor, signal
Checking cables and terminals
- Check fuel tank pressure sensor and control module connectors and connectors 24/2 and 24/4 for loose connections according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and contact resistance and oxidation according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
- Check cable between tank pressure sensor terminal 3 and engine control module (ECM) #B31 via connector 24/4 terminal E5 and connector 24/2 terminal C6 for an intermittent short-circuit to supply voltage according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
- Check cable between tank pressure sensor terminal 2 and engine control module (ECM) #B28 via connector 24/4 terminal E6 and connector 24/2 terminal C7 for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Continue -
------------------------
Fault-tracing information
Information
Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).
Do you want to view the information again?
Yes - Attempt New Test
No - FAULT FOUND
------------------------
Attempt New Test -
-------------------------------------------------
-------------------------------------------------
Safety
First read Safety regulations for handling fuel Safety Regulations For Handling Fuel.
Continue - Checking cables and terminals
-------------------------------------------------
Checking cables and terminals
- Check fuel tank pressure sensor and control module connectors and connectors 24/2 and 24/4 for loose connections. Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and contact resistance and oxidation. Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
- Check cable between tank pressure sensor terminal 2 and engine control module (ECM) #B31 via connector 24/4 terminal E5 and connector 24/2 terminal C6 for an intermittent short-circuit to supply voltage. Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults and an intermittent open-circuit. Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
- Check cable between tank pressure sensor terminal 1 and engine control module (ECM) #B28 via connector 24/4 terminal E6 and connector 24/2 terminal C7 for an intermittent open-circuit. Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Continue - Fault-tracing information
DONE
-------------------------------------------------
Fault-tracing information
Information
Attempt New Test - Checking cables and terminals
-------------------------------------------------