Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

Condition




If the control module registers that the signal from the resistive wire is more than 5 V for 10 seconds after: The alarm system is voltage charged or the alarm activated or deactivated, Diagnostic trouble code (DTC) GLA-441 is stored.

Substitute value
None.

Possible source
- Short-circuit to supply voltage in the signal cable.
- Open-circuit in signal cable.
- Open-circuit in the resistive wires in the rear side windows.

Fault symptom[s]
- When the ignition is switched on the indicator LED flashes at 4 Hz for 15 seconds.
- Resistive wire glass sensor alarm function missing.