Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

IMM-112 Control module

Condition




The control module controls the EEPROM memory circuit for certain entries to the EEPROM memory. diagnostic trouble code (DTC) IMM-112 is stored if there are any faults in the memory circuit. Faults which cause diagnostic trouble code (DTC) IMM-112 to be stored can also cause diagnostic trouble code (DTC) IMM-121 to be stored.
The diagnostic trouble code (DTC) is erased when the counter value reaches 254.

Possible source
- Fault in the control module memory circuit.

Fault symptom[s]
- The control module does not approve or cannot read the PIN when programming.
- New keys cannot be programmed.
- The engine starts occasionally, but not with a fault in a certain memory cell. Can mean a start with certain of the customers keys.