Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information

IMM-214 Communication from engine control module (ECM)

Condition

Hint: MIN code is a model specific code which will prevent prohibited changes to other engine management systems and is sent during the communication phase(the first two seconds at the start) between the immobilizer control module and the engine control module (ECM).




Each time the immobilizer control module and engine control module (ECM) communicate, the immobilizer control module checks if the engine control module (ECM) data contains the wrong MIN code. Diagnostic trouble code (DTC) IMM-214 is stored in case of faulty MIN code.
The diagnostic trouble code (DTC) is erased when the counter value reaches 254.

Possible source
- Wrong type of engine control module (ECM).
- Faulty initiating of immobilizer control module. (Immobilizer control module is programmed for another engine control module (ECM) than that being used.)

Fault symptom[s]
- The engine starts but stalls directly.