Rear Lock Arm Potentiometer

Before starting work, see CHA. Preparations Before Work. Procedures

CHC1 Removal:





- Move the hood to the position shown in the image.
- Ignition off.
- Make a note of any radio code.
- Disconnect the battery negative lead.

The potentiometer is located on rear lock arm, left side





Remove:
- connector.
- 1 socket-head screw.

Carefully withdraw potentiometer from shaft and remove potentiometer.

CHC2 Installation:
Install in reverse order and calibrate the hood (convertible top) as described in BOA. Operational Tests. Testing and Inspection