Checking ABS Warning Indicator

Checking ABS warning indicator

Verify




Verify

Verification

Hint: After repair it is necessary to check that the symptom no longer exists.

Perform as follows:








- Ignition off.
- Reconnect connectors, components etc.




- Ignition on.

Note! If DTCs have been erased prior to this verification and no test drive has been performed, the ABS warning indicator will only go out once the car's speed exceeds approx. 30 km/h (18 mph), provided that no new DTCs have been posted in the meantime.

Control module should activate ABS warning indicator when ignition is turned on. Indicator should go out after approx. 2 s if no error is detected.

OK - VERIFIED

Not OK - VERIFICATION FAILED

------------------------

-------------------------------------------------