Verification of TRACS Warning Indicator Function

Verification of TRACS warning indicator function

Verify




Verify

Verification

Hint: After repair, it is necessary to check that the symptom no longer exists.
Perform as follows:








- Ignition off.
- Reconnect connectors, components etc.




- Ignition on.
- When ignition is turned on the control module will activate TRACS warning indicator. Check that the warning indicator goes out after approx. 2 s.
Note! The indicator will not go out if the TRACS function is deactivated by means of the switch or if a fault has been detected.

Check that the indicator comes on and then goes out.

OK - VERIFIED

Not OK - VERIFICATION FAILED

------------------------

-------------------------------------------------