Brake Switch (Cruise Control): Service and Repair

Replacing stop (brake) light switch early type

Note! There are two types of stop (brake) light switch. An early type that requires manual adjustment, and a later type that is self-adjusting.

Preparations




- Check that ignition is switched off.
- Disconnect battery ground lead.
- Remove soundproofing.

Removing
- Undo stop (brake) light switch locknut.
- Unscrew stop (brake) light switch.
- Disconnect connector.

Installing




- Depress brake pedal 12 mm. Lock the pedal in position with a pedal jack.
- Screw in new stop (brake) light switch.
- Connect the connector.
- Continue with adjustment according to Stop (brake) light switch early type Adjustments.