Programming The ECC Control Module

Programming the ECC control module

Query

Connecting

Connecting the Volvo Scan Tool (ST)
The Volvo Scan Tool (ST) must be connected to the VIDA PC and data link connector (DLC) in the passenger compartment.

Is the Volvo Scan Tool (ST) connected and switched on?

Yes - FAULT FOUND

No - No Fault Found

------------------------

FAULT FOUND - Programming the ECC control module

No Fault Found - Connecting Volvo System Tester

-------------------------------------------------

Connecting Volvo System Tester

Connecting the Volvo Scan Tool (ST)

Connecting the Volvo Scan Tool (ST)

- Ignition off.
Insert the blue memory cassette in the Volvo Scan Tool (ST).
Connect adapter 951 1457 Adaptor 951 1457 Adaptor to the cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters.
Connect VIDA communication cable between adapter and VIDA PC.
Connect cable 951 1458 Scan tool cable 6 meters 951 1458 Scan Tool Cable 6 Meters from Volvo Scan Tool (ST) to the data link connector (DLC) in the passenger compartment.
Switch on the Volvo Scan Tool (ST) switch.

Continue - DONE

------------------------

DONE - Programming the ECC control module

-------------------------------------------------

Programming the ECC control module

FAULT FOUND - DONE

-------------------------------------------------