AAA.

AAA1

Location of bulbs





The illustration shows the location of the bulbs on the right-hand side. The same applies to the left-hand side but in reverse.

The bulbs have the following functions:

1+4 = Parking lamp/Tail lamp

2 = Back-up (reversing) lamp

3 = Fog tail lamp, only on the left-hand side (LHD cars).

5 = Turn signal lamps

6 = Stop (brake) lamp

AAA2





Replacing tail lamp bulbs

Ignition off.

Open tail lamp cover.

Undo wingnut and remove bulb holder.

Replace the faulty bulb.

Assemble in reverse order.

^ Test all bulbs.

AAA3

Replacing tail lamp assembly

Open tail lamp cover.

Slacken off the panel in front of tail lamp.

Detach connector for tail lamp.





Remove the four nuts holding the tail lamp, see illustration.

Pull light straight back.

Assemble in reverse order.

Note!
Check seal and fit when reassembling.

^ Test all bulbs.