Replacement of Complete Unit

1. Removal
- Remove:
- Negative battery lead.
- Center console as per steps 3 and 4 of Shift Cable, A/T replacement, refer to Transmission and Drivetrain.
- Gear shift knob as per steps 1 and 2 of Replacement, refer to Shift Lever, A/T.
- Panel and shutter.
Depress catches at front edge of panel and lift slightly.
Pry side catches outward, and remove panel and shutter.





2. Installation
- Transfer or install new boot (gaiter) to shutter
- Install:
- The shutter.
Check that the indicator is on correct side of lever.
- The panel.
Start at rear edge and then press into position in middle.
Press home catches at front edge.
- Center console as per step 6 of Shift Cable, A/T replacement, refer to Transmission and Drivetrain.
- Gear shift lever knob as per step 3 of Replacement, refer to Shift Lever, A/T.
- Battery negative lead.