Pump Seal

SPECIAL TOOLS
- Extractor tool No. 999 5069, or equivalent
- Drift tool No. 999 5117, or equivalent

- Refer to special tool section for additional tool information. Tools and Equipment

REMOVAL
1. Torque converter
- Pull the torque converter straight out of the transmission.
- Check the torque converter throat for damage.





2. Seal ring, oil pump-torque converter
- Use extractor Tool No. 999 5069, or equivalent.

INSTALLATION





3. New seal ring
- Use drift tool No. 999 5117, or equivalent.

NOTE: Drift 999 5117 modified as per Workshop Guide.





4. Torque converter
- Lubricate torque converter throat with ATF oil.

NOTE: Take care not to damage the oil pump during installation.

- Make sure torque converter is as far into the transmission as possible.
Check with a ruler.
The distance between the cover and retaining tabs should be approximately 14 mm (0.55 inch).