Power Windows Switch Rear Tunnel Panel Convertible, Replacement

Power windows switch rear tunnel panel Convertible, replacement

Disconnecting switch




Ignition off.
Carefully insert an electrician's screwdriver or weatherstrip tool between the panel and the side edge of the switch. Carefully pry outwards until the switch can be gripped with the fingers.

Note! Put something between the screwdriver and the surrounding panel so as not to damage it.

Pull the switch out.
Disconnect the connector.
Replace the switch.

Installing switch
Connect the connector. Check that the switch is working before installing it.
Reinstall the switch, press into place in the panel.
- Test switch function.