Noise Reduction - Glove Compartment
1Noise from glove compartment lid due to excessive play at lock
Cut 2 pieces of tape (10x10 mm), P/N 681283-8.
Install pieces of tape on cover facing rubber stops
Hint:
The rubber stops indicate the markings in the cover which can be used as markings for locating the pieces of tape.
Noise from glove compartment lid stop arm
2
Install a piece of tape (A), P/N 679904-3, on stop arm nearest center console as illustrated.
The tape should also cover the sides of the stop.
3
Squeaking from glove compartment lighting
Remove glove compartment lamp cover.
Apply grease, P/N 1161417-9, on return spring for glove compartment lamp switch.