Checking Fuses

F1 Checking fuses




- Switch off ignition.
- Remove fuses 9 and 13.
- Confirm that fuses 9 and 13 in the central fuse module in the passenger compartment are intact.
- Confirm that fuse 2 is intact.

If a fuse is defective:
- Temporary overload or fault in the central locking system. Install new fuse and proceed to F4. F4 Manual Function of Central Locking

If the fuses are intact:
Check that the transmitter and receiver are using the same frequency. Continue to F2. F2 Checking Supply (30) to Fuse 13