Signal Missing. Intermittent Fault

Checking Cables And Terminals
- Check canister purge (CP) valve and/or engine control module (ECM) connectors for contact resistance, oxidation and loose connections.
- Check cable between canister purge valve terminal 1 and main relay (2/32) terminal 3 for an intermittent open-circuit.
- Check cable between canister purge valve terminal 2 and engine control module # A39 for an intermittent open-circuit.

Fault-tracing Information
- For intermittent faults fault-tracing is not followed by a verification because the fault is not present at this moment.
- Do you want to repeat fault-tracing?

Yes:
^ Return to Checking Cables And Terminals section above.

No:
^ Operation done