Rear

Tools Required
^ 999 5659 Tensioner

Removal
1. Remove shock absorber and spring.





2. Disconnect the control arm from the tensioner 999 5659.
Remove:
- Support arm from control arm.
- The control arm.

Installation





1. Install:
- The control arm. Press in screws only so far that the scored section is not in the bushing.
- Support arm to control arm. Tighten to 80 Nm (59.1 ft. lbs.).

NOTE: Tighten control arm and support arm when the rear axle is in its normal position.

Tension tensioner 999 5659. See: Use of tensioner 999 5659.
2. Install rear spring and shock absorber.