Procedures

Before starting work, see CHA. Preparations Before Work. Procedures

CHC3 Removal of Potentiometer, Hood:





- Move the hood to the position shown in the image.
- Ignition off.
- Make a note of any radio code.
- Disconnect the battery negative lead.





Remove:
- connector.
- cable ties.
- 1 socket-head screw.

- Carefully withdraw potentiometer from shaft and remove potentiometer.

CHC4 Installation of Potentiometer, Hood:
Install in reverse order and calibrate the hood. See "Operational Tests" and "Programming and Calibration of Convertible System". Testing and Inspection