Procedures

ADA1. Seat Cushion






Pull away the seat cushion at the outside front edges.




ADA2. Back Cushion






Remove:
The arm-rest
The seat cushion, refer to ADA1
2 bolts from the back cushion at the outer bottom edges of the cushion
The head restraint, refer to ADA3.
Lift out the back cushion.


NOTE: Push back at the lower edge of the cushion when it is lifted out. Pull the seat belts around the back cushion and lift the cushion out.


ADA3. Head restraint






Removal
Insert your hand behind the back cushion and press the head restraint catches forward (see figure). Lift and remove the head restraint.

Installation
Press the head restraint down into the bushes and check that the catches lock.


ADA4. Long Load Hatch






Remove:
The arm-rest
The seat cushion, refer to ADA1
2 bolts from the back cushion at the outer bottom edge of the cushion
2 clips from the inside rear edge of the opening


CAUTION! If the clips fall apart replace them with new ones.


angle the back cushion forward and push the long load hatch backwards


NOTE: Put your weight against the back cushion when pushing the long hatch backwards


the head restraints, refer to ADA3. Lift out the back cushion


NOTE: Push back at the lower edge of the cushion before it is lifted out.


Pull out the long load hatch
Lift the lower edge of the opening and push it backwards Turn the opening and the bag and take them out diagonally.