Connecting the Breakout Box (Combined Instrument Panel)

CONNECTING BREAKOUT BOX, COMBINED INSTRUMENT PANEL

Special tools: 981 3190, 981 3194

Connecting the breakout box
- Ignition off.
- Expose combined instrument panel according to Combined Instrument Panel, Replacing
- Disconnect combined instrument panel.
- Check that the male and female terminals in the combined instrument panel and cable harness connectors are intact and secure and that the wiring to the female terminals is properly attached to the terminal.
- Check in particular the terminals relevant to the diagnostic trouble code (DTC)/symptom.

Connect adapter 981 3194 to combined instrument panel connectors A and B and connect the breakout box 981 3190 to the adapter.

Disconnecting the breakout box in reverse order.