No Signal. Intermittent Fault
No signal. Intermittent fault
STC or DSTC
Question
Question
Does the car have a DSTC system?
Yes - DSTC
No - STC
------------------------
STC - Checking the wiring and connections
DSTC - DSTC
-------------------------------------------------
Checking the wiring and connections
Check the connectors of the control unit and the relevant wheel sensor for intermittent contact resistance and oxidation, as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Check the wires between relevant wheel sensor connector:
Diagnostic trouble code ABS-0030 Rear LH wheel sensor
#1 and control unit #6
Diagnostic trouble code ABS-0040 Rear RH wheel sensor
#1 and control unit #22
for an intermittent open circuit as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , for an intermittent short circuit to ground as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , and for an intermittent short circuit to voltage supply as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Check the wires between relevant wheel sensor connector:
Diagnostic trouble code ABS-0030 Rear LH wheel sensor
#2 and control unit #5
Diagnostic trouble code ABS-0040 Rear RH wheel sensor
#2 and control unit #23
for an intermittent open circuit as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , for an intermittent short circuit to ground as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , and for an intermittent short circuit to voltage supply as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Do the necessary corrective action.
Additional information:
- To connect the test box, see Connecting the ABS breakout box Connecting the Breakout Box.
- For additional values, see Signal specification, ABS control module Signal Specification, ABS Control Module.
Select Continue when the fault has been rectified.
Continue - Trouble-shooting information
-------------------------------------------------
Trouble-shooting information
Information
Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).
Do you want to view the information again?
Yes - Attempt New Test
No - Exit fault-tracing
------------------------
Attempt New Test - Checking the wiring and connections
-------------------------------------------------
DSTC
No signal. Intermittent fault
Checking the wiring and connections
Check the connectors of the control unit and the relevant wheel sensor for intermittent contact resistance and oxidation, as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Check the wires between relevant wheel sensor connector:
Diagnostic trouble code ABS-0030 Rear LH wheel sensor
#1 and control unit #36
Diagnostic trouble code ABS-0040 Rear RH wheel sensor
#1 and control unit #6
for an intermittent open circuit as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , for an intermittent short circuit to ground as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , and for an intermittent short circuit to voltage supply as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Check the wires between relevant wheel sensor connector:
Diagnostic trouble code ABS-0030 Rear LH wheel sensor
#2 and control unit #37
Diagnostic trouble code ABS-0040 Rear RH wheel sensor
#2 and control unit #7
for an intermittent open circuit as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , for an intermittent short circuit to ground as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults , and for an intermittent short circuit to voltage supply as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Do the necessary corrective action.
Additional information:
- To connect the test box, see Connecting the ABS/DSTC breakout box Connecting the Breakout Box.
- For additional values, see Signal specification, ABS / DSTC (dynamic stability and traction control) control module Signal Specification, ABS / DSTC (Dynamic Stability and Traction Control) Control Module.
Continue - Trouble-shooting information
------------------------
Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).
Do you want to view the information again?
Yes - Attempt New Test
No - Exit fault-tracing
-------------------------------------------------