Signal Faulty. Intermittent Fault

Signal faulty. Intermittent fault

Question




Question

Does the car have a DSTC system?

Yes - DSTC

No - STC

------------------------

STC - Checking the wires

DSTC - DSTC

-------------------------------------------------

Checking the wires
Check the cables between the fuse and control module terminal #9 and between the fuse and the battery for intermittent open circuit as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Additional information:
- For further information about the fuses and relays, see the relevant wiring diagram.
- For information on connecting the test box, see Connecting the ABS breakout box Connecting the Breakout Box.













Continue - Trouble-shooting information

-------------------------------------------------

Trouble-shooting information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Exit fault-tracing

------------------------

Attempt New Test - Checking the wires

-------------------------------------------------

DSTC





Faulty signal. Intermittent fault

Checking the wiring
Check the cables between the fuse and control module terminal #16 and between the fuse and the battery for intermittent open circuit as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.

Other information:
- For further information about the fuses and relays, see the relevant wiring diagram.
- For information about connecting the breakout box, see Connecting the ABS/DSTC breakout box Connecting the Breakout Box.













Select Continue when the fault has been remedied.

Continue - Fault-tracing information

------------------------

Fault-tracing information

The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

-------------------------------------------------