Overview Of Installation

Overview of installation





Several openings can be used:
1. 14 defroster openings - leads air to the windshield and the front doors' windows for fast warm-up and demisting. The air can pass through the evaporator and the heater.
2. 4 ventilation openings - blows in air directly to the passenger compartment. Vents can be set in different directions and can be closed individually.
3. 6 floor vents - are located on both sides of the centre console and blow out air both front and back.
4. Air mix openings - the two middle openings are also used for the air mix function. Non-warmed air can be directed to these openings. For more information, see: Air mixing openings Air Mixing Openings

Structure in the car
The heating system and air conditioning unit in the car are built up of three separate parts.
A.
This unit is the air inlet. The fan motor and recirculation valves are also located there. The recirculation valves are electrically operated by a servo motor. They only have two positions: fully open or fully closed. Closed means 100% recirculation. This can be set manually or with the ECC control module.
B.
The evaporator is located in this unit. The temperature sensors for the ECC-system and AC-system's temperature-controlled expansion valve are located directly on top of the evaporator. The pollen filter is located in front of the evaporator.
C.
This is the location of the heating coil, valves for air distribution to the various vents, and the valve for air mix.