Scan Tool Testing and Procedures

Connecting the breakout box. Combined instrument panel

Special tools: 951 1372, 981 3190

Connecting the breakout box







- Ignition off
- Disconnect the combined instrument panel
- Disconnect the combined instrument panel connectors.

On the combined instrument panel connectors check that:

- The male and female terminals are undamaged and are properly secured (cannot be pressed in).
- The wiring for the female terminals is securely connected.
- In particular check those terminals that are relevant to the stored diagnostic trouble code (DTC) or symptom.

Connect adapter 951 1372 to the control module connectors. Connect breakout box 981 3190 to the adapter.

Disconnect the breakout box in reverse order.