Throttle Position Sensor: Service and Repair

Replacing throttle position (TP) sensor

Removing throttle position (TP) sensor




- Remove throttle body,
- Clean the surface
- Remove the two screws
- Pull off sensor
- Check the components.

Installing throttle position (TP) sensor




- Clean screws and apply locking fluid, P/N 1 161 053
- Secure the sensor, see illustration.
Turn the sensor until some opposition can be felt
- Install the two screws. Torque to 5 Nm
- Seal the screws
- Reinstall throttle body,
Start engine. Read any diagnostic trouble codes (DTCs).