CD Servo Fault. Permanent Fault

CD servo fault. Permanent fault

Checking CD changer and disc
Check that there is no condensation on the disc.
Check that the disc is correctly inserted.
Try a new disc.
Replace the CD changer if the CD changer does not function.
Remedy as necessary.
If no fault is found replace the head unit/audio module.

Caution! New head unit/audio control modules are supplied without software. The head unit/audio control module must be programmed after it has been replaced.

Other information:
- For information about programming and replacing the head unit/audio control module, see Radio cassette player, replacing Radio Cassette Player, Replacing.

Select "Continue" when the fault has been remedied.

Continue - Verification

-------------------------------------------------

Verification




Verification

Hint: After carrying out the repair, check that the fault has been remedied.








- Ignition off.
- Reinstall connectors, components etc.
- Ignition on.
Check that CD changer functions.

Does the CD changer function?

Yes - Verification completed

No - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
The fault should have been detected and remedied. As this is not the case fault-tracing has failed.
Exit fault-tracing for this diagnostic trouble code (DTC) or make another attempt.

Do you want to exit fault-tracing?

Yes - Exit Fault-Tracing

No - Attempt New Test

------------------------

Attempt New Test - Checking CD changer and disc

-------------------------------------------------