Adjusting the Clutch Valve

Adjusting The Clutch Valve







- Ignition off.
- Clutch valve disconnected.
- Press the pedal so that it is not in contact with the valve.
- Pull out the piston as far as possible. Slowly release the pedal.

Connect an ohmmeter between both the terminal pins on the clutch valve.

The ohmmeter should read approximately 0 [ohm] when the brake pedal is unaffected. The ohmmeter should read infinite resistance when the pedal is depressed more than 8 mm.

OK - Verification

NOT OK - Replacing the Component - I