Internal Fault. Intermittent Fault
Internal fault. Intermittent fault
STC or DSTC
Question
Question
Does the car have a DSTC system?
Yes - DSTC
No - STC
------------------------
STC - Intermittent fault
DSTC - DSTC
-------------------------------------------------
Intermittent fault
Check the wiring between the battery positive terminal and transmission control module (TCM) terminal #9 for an intermittent open-circuit according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Other information:
- To connect the breakout box, see Connecting the ABS breakout box Pinout Values and Diagnostic Parameters
- To disconnect the ABS control module connector, see
- For other values, see Signal specification, ABS control module Signal Specification.
Continue - DONEFault-tracing information
-------------------------------------------------
Fault-tracing information
Information
Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).
Do you want to view the information again?
Yes - Attempt New Test
No - Fault Found
------------------------
DONE - DONE
FAULT FOUND - Fault Found
Attempt New Test - Intermittent fault
-------------------------------------------------
DSTC
Internal fault. Intermittent fault
Intermittent fault
Check the wires between the positive battery terminal and control unit #16 for an intermittent open circuit, as described in Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults.
Additional information:
- To connect the test box, see Connecting the ABS/DSTC breakout box Pinout Values and Diagnostic Parameters.
- For disconnection of the ABS control unit connector see Replacing the control module for ABS and dynamic stability and traction control (DSTC) Replacing the Control Module for ABS and Dynamic Stability and Traction Control (DSTC).
- For additional values, see Signal specification, ABS / DSTC (dynamic stability and traction control) control module Signal Specification.
Continue - DONETrouble-shooting information
------------------------
Trouble-shooting information
Information
DONE - DONE
FAULT FOUND - Fault Found
Attempt New Test - Intermittent fault
------------------------
FAULT FOUND - Fault Found
DONE - DONE
-------------------------------------------------