Checking Wiring and Connectors

Checking Wiring And Connectors







Check the cable between engine control module (ECM) terminal #B25 and accelerator pedal (AP) position sensor terminal #2 for an intermittent short-circuit to supply voltage according to Checking wiring and terminals. Intermittent faults

Remedy as necessary.

Other information:
- To connect the breakout box, see Connecting the breakout box.
- To access/replace the accelerator pedal (AP) position sensor, see Replacing the accelerator pedal module.
- For information about signals, see Signal specification.

Continue with Test (See "Fault-Tracing Information - Intermittent Fault"). Fault-Tracing Information - Intermittent Fault