Checking Component and Wiring - II

Checking Component And Wiring







Check cable between engine control module (ECM) connector #B9 (#B19) and accelerator pedal (AP) position sensor #6 for an intermittent short-circuit to supply voltage according to Checking wiring and terminals. Intermittent faults.

Remedy as necessary.

Other information
- To connect the breakout box, see Connecting the breakout box.
- To access/replace the accelerator pedal (AP) position sensor, see Replacing the accelerator pedal module.
- Before replacing engine control module (ECM), see Engine control module (ECM), replacing.
- For information about signals, see Signal specification.

Continue with Test (See "Fault-Tracing Information - Intermittent Fault"). Fault-Tracing Information - Intermittent Fault