DTC ECM-9300

Condition







Diagnostic trouble code (DTC) ECM-9300 is stored if the engine control module (ECM) registers a fault in the signal from clutch pedal position sensor.

Substitute value
- cruise control shut off

Possible source

Signal too high
- short-circuit to supply voltage in the signal cable

Signal too low
- short-circuit to ground in the signal cable
- defective clutch pedal position sensor

Faulty signal
- defective clutch pedal position sensor
- open-circuit in signal cable
- incorrectly installed clutch pedal position sensor

Fault symptom[s]
- general orange warning lamp lit
- cruise control does not function at all.