Signal Too Low - Intermittent Fault

Signal too low. Intermittent fault

Checking wiring and connectors
Check signal cable between control module #A22 (#A22) and mass air flow (MAF) sensor terminal 3 for an intermittent short-circuit to ground according to Checking wiring and terminals. Intermittent faults Checking Wiring and Terminals. Intermittent Faults. The Intake Air Temperature (IAT) sensor is integrated into the Mass Air Flow (MAF) sensor.

Other information:
- To connect the breakout box, see Connecting the breakout box Connecting the Breakout Box
- To access the control module, see
- To access/replace the Mass Air Flow (MAF) sensor, see
- For information about signals, see Signal specification Signal Description / Specification.










Continue - Fault-tracing information

-------------------------------------------------

Fault-tracing information




Information

Fault-tracing information
If the fault is intermittent, do not verify fault-tracing if the fault does not recur.
It is possible to view the information again, or leave fault-tracing for this diagnostic trouble code (DTC).

Do you want to view the information again?

Yes - Attempt New Test

No - Fault Found

------------------------

Attempt New Test - Checking wiring and connectors

DONE - DONE

FAULT FOUND - DONE

-------------------------------------------------