Diagnostic Trouble Code (DTC) Information

Diagnostic trouble code (DTC) information ECM-1400

Condition




The engine control module (ECM) measures the pressure in the intake manifold using a sensor.
This diagnostic trouble code (DTC) is stored if the engine control module (ECM) registers a short-circuit to ground or supply voltage or an open-circuit in the sensor circuit.
The diagnostic trouble code (DTC) is diagnosed when the ignition is on.

Substitute value
- A value from the mass air flow (MAF) sensor is used.

Possible source

Signal too high
- Short-circuit to supply voltage in the signal cable
- Open-circuit in the signal cable
- Damaged manifold absolute pressure (MAP) sensor.

Signal too low
- Short-circuit to ground in the signal cable
- Damaged manifold absolute pressure (MAP) sensor.

Fault symptom[s]
- Malfunction indicator lamp (MIL) lit.