Selector Switch

Selector Switch
The cruise control selector switch is located on the turning indicator stalk. To activate the cruise control the switch must be ON and the SET button must be pressed in. Vehicle speed must exceed 35 km/h.







When the system has been engaged vehicle speed can be adjusted up or down by pressing the + or - SET button. Every time the SET button is pressed the vehicle speed setting changes by 1.6 km/h (1 mph). If the control module is switched off (by pressing the brake or clutch pedals or the ON/OFF button) the latest vehicle speed setting is stored in memory until the ignition is switched off. This speed can be restored by moving the ON/OFF button to the RESUME position.