Removal and Replacement

Replacing the mass air flow (MAF) sensor

Replacing the mass air flow (MAF) sensor




- Remove the clamp and the air intake hose. Use a twisting movement.
- Disconnect the connector.
- Remove the two Tx 25 screws.
- Remove the mass air flow (MAF) sensor.
- Remove the O-ring.

Installing the mass air flow (MAF) sensor
- Install a new O-ring.
- Position the mass air flow (MAF) sensor with the connector upward.
- Tighten the screws.
- Connect the connector.
- Clean the air intake hose. Press the air intake hose firmly into place on the mass air flow (MAF) sensor.
- Tighten the clamp.
- Check the function.