DTC ECM-930C

Condition







The engine control module (ECM) checks the signals from the clutch pedal sensor.

Diagnostic trouble code (DTC) ECM-930C is stored in the engine control module (ECM) if the engine control module (ECM) registers a fault in the signals from the clutch pedal sensor.

Diagnostic trouble code (DTC) ECM-930C can be diagnosed when the ignition is on.

Substitute value
- The cruise control is disengaged when the fault is active.

Possible source

Signal too high
- Short-circuit to voltage in the signal cables
- Open-circuit in the signal cables
- Defective clutch pedal sensor.

Signal too low
- Short-circuit to ground in the signal cables
- Defective clutch pedal sensor.

Faulty signal
- Short-circuit to supply voltage or ground in the wiring for the actuator
- Open-circuit in the wiring for the actuator
- Defective electronic throttle unit (ETM).

Fault symptom[s]
- Cruise control does not function at all.