Pinout Values and Diagnostic Parameters

Cruise Control Signal Descriptions
All the following values are between the terminals in column 1 and terminal #A10 (signal ground).

NOTE: It is important to check the control module and ground terminals according to "Checking Wiring And Terminals, Permanent Faults" and "Checking Wiring And Terminals, Intermittent Faults" before the readings are taken.

U = DC, volt (V)
U(bat)- = Battery voltage
U(low)- = Voltage approximately 0 V

#1 - #2:

#3 - #10:

#11 - #14: