Timing Components: Specifications

Spin the idler pulley and listen for noise. When replacing with a new idler pulley, tighten 24 Nm

Install the new belt in the following order
- crankshaft
- the idler pulley
- intake camshaft
- exhaust camshaft
- water pump
- belt tensioner

Hold the eccentric securely. Tighten the center screw 20 Nm







Screw the engine mounting into place on the engine. Tighten 67 Nm


Install the screws on the bracket for the bodywork. Tighten 50 Nm

Belt tensioner (mechanical) 20 Nm

Timing gear pulley
(camshafts without variable valve timing) 20 Nm

Timing gear pulley (camshafts with variable valve timing) 10 Nm

Timing cover, front 12 Nm

Timing cover, upper 8 Nm

Vibration Damper
flanged screws x4
Stage 1 25 Nm
Stage 2 angle-tighten 30 degrees

Center nut 180 Nm