Headlamp: Adjustments

Headlamps, alignment

Preparations
Switch on the ignition. Switch on low beam.
Check that the battery voltage is normal so that the correct light distribution can be achieved.

Caution! Headlamp beam adjustment is always carried out with the headlamps at low beam.

Adjusting headlamp alignment









Adjust:
- the vertical light distribution (Y) using the 6 mm adjustment screw
- the horizontal light distribution (X) using the 6mm adjustment screw.

Hint: Use a 6 mm drill bit.

Note! headlamp beam adjustment must be carried out according to the relevant national statutory requirements.