Verification - Actuator Current Too High/Throttle Jammed

Verification







HINT: After carrying out the repair, check that the fault has been remedied.

- Ignition off.
- Reinstall the connectors, components etc.
- Ignition on.

Activate reading off the position of the throttle.

Check that both sensors indicate values within the permitted range at different deployments.

Are these values within their permitted ranges?

YES: Refer to Trouble Code Descriptions. Diagnostic Trouble Code Descriptions
NO: Continue with Test (See Fault Tracing Information - Permanent Fault). Fault-Tracing Information - Permanent Fault